From ten aspects easily buy laminate flooring
We can say that in today flooring market, laminate flooring still occupy a dominant position, with its characteristic affordable won the favor of consumers. However, in the cohabitation of the flooring market, we want to buy into a suitable, stable and environmentally friendly laminate flooring really easy. Now, China's wood flooring Xiaobian take you from ten aspects, help you buy into their favorite laminate flooring.
First, the surface wear revolution: types of privacy fences is determined by the surface wear layer, and is represented by wear revolution. Household generally about 6,000 rpm, 10,000 rpm or so public. Today laminate flooring wear layer on the market there are four: every square meter of aluminum oxide content of about 30g floor, its durability is about 4000 rpm; wearable content of about 38g of about 5,000 rpm; content abrasion resistance about 44g of about 9000 rpm; wearable content about 62g of about 18,000 rpm.
Second, the free formaldehyde content: Laminate flooring adhesives containing a certain amount of formaldehyde, formaldehyde excess hazardous to your health, long-term danger to human if high concentrations of formaldehyde in the environment, there will be carcinogenic. Our air formaldehyde concentration in public places has issued mandatory standards, shall not exceed 0.12mg / m3. According to state regulations, laminate flooring formaldehyde content shall not exceed 30mg / 100g, preferably 9mg / 100g or less.
Third, thickness swelling: The higher the index, the more expansive floor. State regulations This indicator within 2%.
Fourth, the internal bond strength: The quality reflects glued between the substrate inside the fiber, the greater the intensity, the closer the bond between the layers of wood flooring, the state should reach 1Map above this indicator.
Fifth, the surface resistance to cigarette ignition: the cigarette on the floor, to see whether the surface cracks, spots, bubbling, without this floor better flame retardancy.
Six floors density: the higher the density, the product is generally good mechanical properties, good impact resistance. However, under the same conditions, thickness swelling is too large, dimensional stability to be worse; in addition the greater the density, the product cost to increase the number.
Seven, static bending strength and elastic modulus: These two products are an important indicator of mechanical strength, mainly depends on the quality of wood and glue, and ultimately reflected in the ability of resistance to deck board resurfacing, the higher the index, the floor resistance to external bend fold strength as possible.
Eight, scratch resistant surface: scratch resistant surface degrees, reflecting the ability of the product to resist sharp hard object. The higher the value of surface resistance to scratches, resistance to sharp hard object, the stronger.
Nine, surface impact resistance: this indicator consumers can self-test, with a heavy ball landed surface of the product, if obvious surface depressions, the surface impact resistance is poor.
Ten, peeling resistance: This indicator reflects the reinforced veneer quality wood floor surface between the decorative layer and the substrate, such as poor bonding quality, after a period of use of the product will have the decorative layer removed.
评论 (0)
